Grain Harvest

Stay clear when powerlines are near

When it comes to the potential dangers of working around powerlines and other network infrastructure, there are some key safety messages to keep in mind. Following some simple steps could help keep you and your workers safe on the land while you are harvesting or sowing.

Plan for a safe season

Look up and Live - Know the location of powerlines on your property. The Look up and Live app can help you plan work near powerlines. This tool may help minimise contact and reduce the risk of injury or death from electrocution and damage to equipment and our electricity network. Check your surroundings prior to extending machinery – including when tipping loads. Always make sure all workers on your site know the location of powerlines and how to be safe around them.
Install aerial markers in areas with poor or low visibility – Essential Energy can install overhead powerline markers on your property to help increase the visibility of powerlines. Visit essentialenergy.com.au/aerialmarkerprogram to request aerial markers on your property. You can also use ground barriers or install appropriate signage at least 8 to 10 metres either side of powerlines.
Know the lowered and extended height of all machinery – ensure all machinery operators are aware of the height and reach of their machinery in both stowed and working positions to ensure that minimum safe approach distances are maintained. Always lower machinery fully before moving off.
Keep an eye on the weather – if you’re planning harvesting or sowing activities, make sure you keep an eye on the weather. Powerlines can sag and sway in hot weather and windy conditions are difficult to see at dawn and dusk. Visit our StormTracker to check out the weather for your areas.
Order free stickers and signs for your machinery

Download our Harvest Safety Fact Sheet

Stay Clear When Powerlines Are Near

Ensure required minimum approach distances are maintained at all times. It’s a good idea to assign a competent safety observer to each work team to guide machinery movements when working in the vicinity of powerlines.

With storms about, always be on the lookout for fallen powerlines and indicators of network damage. Always stay at least 8 metres away from fallen powerlines and anything they may be in contact with and report the fault immediately. Remember, damaged or fallen powerlines can be hard to spot. Indicators of potential network damage may include:

Flickering or no power supply
Burnt areas in paddocks or roadsides
Injured or downed stock
Smoke or fallen trees.

Contact Essential Energy on 132080 to report the issue.

What to do if something goes wrong

If your machinery comes into contact with the electricity network it’s important you know what to do.

Emergency Escape Procedure:

Stay in your vehicle and call 000 immediately
If escape is absolutely necessary (because of fire), jump well clear to avoid contact with the vehicle and the ground at the same time
When you jump, land with your feet together. Do not touch the vehicle, fall or allow your feet to step apart
You must shuffle or jump (with your feet together) until you are at least 8 metres clear of the vehicle, powerlines or anything else in contact with them
Once clear, do not return to the vehicle for any reason
Call Essential Energy on 132080
Remember to never approach a vehicle to assist in an evacuation and always treat powerlines as if they are ‘live’.

Download the Emergency Escape Procedure Fact Sheet